The perfect way to fill a keg from virtually any other source. Fill a commercial keg from a pressure fermenter, a homebrew keg from a commercial keg, or a mini keg from any of them. No oxygen contact, no loss of carbonation, no wastage in foam overflow, and the transfer stops automatically once filling is complete!
- Flush out your empty vessel sanitiser & gas then hook it up to your filling source for a completely oxygen-free transfer under pressure.
- Connect to virtually any pub style tap, commercial keg coupler, or homebrew keg post to transfer to either the iKegger 2.0 tap system or a standard ball lock keg post.
- The adjustable pressure release valve above the sight glass means you can adjust the flow with ease to make sure there is no foaming during filling.
- When the sight glass fills with liquid the ball inside floats up and blocks the gas outlet. This stops the filling once the keg is full without any intervention.
Fill From:
- a ball lock liquid post (homebrew kegs, pressure fermenters and commercial keg couplers with a liquid ball lock post)
- a beer tap with a 10mm internal spout (this is the most common internal tap diameter - iKegger taps, Nukatap, Intertap, Perlick and most others are the same)
Fill To:
- iKegger 2.0 push fitting spout (it's optional but much easier if you upgrade the button with the button clip so you can leave it locked down while filling - as seen in the video below).
- Anything else with a ball lock liquid post (kegs, fermenters, couplers)
Please note: The package DOES NOT include the steel gas disconnect as one of these is included with the iKegger 2.0 Regulator. You can use any MFL threaded gas ball lock disconnect in its place.
*If you are a brewery, roaster, kombucha maker, batch cocktail producer, or other business that will fill our customer's iKegger mini kegs with delicious drinks using this kit, get in touch for a discounted price and be listed on our map of filling venues.