These are a great option if you want to use your keg while inside your fridge or out at a party.
They are tough, reasonably priced, and impossible to accidentally bump on. You can also use them with the keg lying down.
The connection on the pluto gun is a 6.5mm push-fitting compatible stem (so you can just push a 6.5mm to 8mm reducer onto it to connect 8mm beer line) or you can push hose over the stem and clamp it in place.
Get one as an add-on to any of our packages, you won't be disappointed.
Includes:
- Resin pluto gun
- 6.5mm to 8mm Push-fitting
- 1.2m of 4mm internal / 8mm external beer line (do not cut! This is the correct length for slowing the beer down to prevent foaming)
- Black Plastic Liquid Disconnect
- 1 x FFL 8mm Push Fitting
Note:
A couple of tricks to reduce foaming
- The first splash of beer coming out the tap will often be foamy and if this goes into the glass foam continues to build on it (notice when a bartender pours a beer they often turn the tap on and then put the glass under a second or two later)
- Also ensure you pull the trigger all the way in, pulling it halfway will create turbulence and more foam.
- Having a warm tap and hose will create foam till the cold beer flowing through cools it, best to keep it in the fridge or an esky.